Oricom UHF380PK + ANU200 Antenna + BR100 Bracket Value Pack
· 80 Channels*
· Heavy duty controller speaker mic
· Wide band scanner (400-512MHz)
· 5 watt (max TX power)
· 200 user programmable receive only channels
· 5 digit Selcall ID with alpha display
· 38 CTCSS and 104 DCS
· Duplex (range extender)
· Open/Instant/Priority Scan
· Large, easy to read display
· 5 Year Warranty on UHF380
ANU200 - Key Features
· Pre-tuned to UHF CB Frequency
· Ground independent
· Fiberglass whip
· Elevated feed with heavy duty spring
· Antenna length: 950mm
· Includes 3.8m RG58 coaz cable , pre-terminated FME connector and PL259 connector
BR100 "Z" antenna bracket for boot or bonnet mount.
*This 80 channel narrowband radio has a total of 75 useable voice channels Channels 22 and 23 are used for Telemetry and Telecommand, voice communications are not allowed on these channels.
Channels 61,62 and 63 are guard channels and are not available for use.
Package size 65cm x 23cm x 8cm
TECH SPECS FOR RADIO
|
Compliance |
AS/NZS 4365:2011 |
|
Frequency Range TX |
476.425 - 477.4125 MHz |
|
Frequency Range RX |
400 - 512MHz |
|
Number of TX/RX Channels |
80 UHF CB |
|
Number of user programmable RX only Channels |
200 |
|
Channel Spacing TX/RX |
12.5KHz |
|
Wide Band Scanner |
400~512, 400~420, 420~450, 450~470, 470~512 MHz |
|
Operating modes |
Simplex, Repeater TX offset (+750kHz) |
|
Selcall ID |
5 Digit with alpha display |
|
Scanning Speed |
130 msec per channel |
|
Antenna Impeadance |
50 Ohms |
|
Operating Volts nominal |
13.8 VDC |
|
Operating Volts Range |
10 to 15 VDC |
|
Over Voltage Protection |
Diode and voltage regulator |
|
Over Current Protection |
2 Amp fuse |
|
Reverse Polarity Protection |
Shunt diode |
|
Frequency Stability |
+/- 5ppm |
|
Transmitter |
|
|
RF Output Power |
Nominal 5watts |
|
Modulation |
F3E (FM) |
|
Maximum Deviation |
2.5kHz |
|
Spurious Emissions |
< -30 dBm |
|
TX Audio pre-emphasis |
+ 6dB/octave from 300Hz to 3kHz |
|
Current Consumption during TX |
1.6 Amps with 50 Ohm antenna termination |
|
Reciever |
|
|
Circuit Type |
Dual conversion superheterodyne |
|
IF Frequencies |
1st IF = 21.4MHz , 2nd IF = 450kHz |
|
Current Consumption during RX |
200mA |
|
Sensitivity |
< -123dBm at 12dB SINAD |
|
Sensitivity Receive only channels |
< -110dBm for 12dB SINAD |
|
Selectivity |
+/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB |
|
Intermodulation Immunity |
> 70dB |
|
Spurious Immunity |
> 70dB |
|
Audio Output Power |
3 Watts Maximum |
|
RX Audio de-emphasis |
-6dB/octave 300Hz to 3kHz |
|
Audio frequency response |
300Hz to 3kHz |
|
External speaker jacks |
One on transceiver one on head unit for optional 8 Ohm mono speaker (3.5mm jack.) |